TEFLON DI SPRAY GUNS

image154

FRONT TRIGGER OR REAR TRIGGER DI SPRAY GUNS

NACOM offers two types of PTFE DI SPRAY GUNS .Both styles are designed for total comfort. Both are equal in performance capabilities and it comes down to the type you prefer to use. 

BOTH MODELS are good to operate with a pressure rating of 75 psi.  CV factor for both is .31   


100 series are rear trigger style 

300 series are front trigger style

GUNS ARE SOLD INDIVIDUALLY AND WITH HOSE KIT ASSEMBLIES .

HOSE KIT ASSEMBLIES INCLUDE HOSE TYPE and fittings assembled and ready to install

REAR TRIGGER STYLE

  • NA SG 100    rear trigger gun with 29/32 inlet thread
  • NA SG 101    rear trigger gun with 1/4 fnpt iinlet
  • NA SG 102   rear trigger gun with 3/8 fnpt inlet
  • NA SG 103   rear trigger gun with 1/2 fnpt inlet

FRONT TRIGGER STYLE

  • NA SG 301   front trigger gun with 1/4 fnpt inlet
  • NA SG 302   front trigger gun with 3/8 fnpt inlet
  • NA SG 303   front trigger gun with 1/2 fnpt inlet


HOSE KITS

NACOM'S TEFLON DI SPRAY GUNS CAN BE ORDERED WITH THE FOLLOWING HOSE KITS.


  • PVC BRAIDED HOSE 1/2 "od x 1/4 " id (straight)  7 feet length. Includes 2 ea pvc hose  inserts that are bonded sealed. Includes 2 ea JACO POLYPROPYLENE MALE CONNECTOR FITTINGS mounted to gun


  • COILED HOSE  available in POLYURETHANE, FEP and PFA TEFLON.  36 inch relaxed 7 feet stretched with 6 inch tails. sizes 1/4" od, 3/8" od, 1/2" od

HOSE OD WILL BE MATCHED WITH THE INLET  THREAD OF GUN  . INCLUDES 2 EA MALE CONNECTOR FITTINGS

. PTFE spray guns Teflon spray guns

FOR HOSE ASSEMBLY PART NUMBERS

REFER TO NACOM SPRAY GUN CATALOG PAGE FOR PART NUMBER AND DESCRIPTION

RECIRCULATING DI SPRAY GUNS

NACOM does offer the DI SPRAY GUN in a RECIRCULATING SPRAY TYPE (SEE CATALOG PAGE FOR PART NUMBERS)



TEFLON NITROGEN GUNS

image155

NACOM'S PTFE NITROGEN GUNS

NACOM OFFERS NITROGEN GUNS WITH 3 BODY STYLES TO CHOOSE FROM

  • NA-N2-1  is the straight body gun. This is our least expensive of the 3 styles we offer
  • NA-N2-2  is the rear trigger pistol style  gun
  • NA N2 -3  is the front trigger  pistol style gun 

NACOM PTFE NITROGEN GUNS

GUNS are equipped with one each with a disposable nacodisc .45 micron filter cartridge

nacodisc filter cartridges  can be purchased in bags of 10, 50 and 100 


NACOMS N2 GUNS CAN BE PURCHASED ALONE OR WITH HOSE ASSEMBLIES .

GUNS HAVE A MAXIMUM OPERATING PRESSURE OF 90 PSI


NACODISC DISPOSABLE FILTER CARTRIDGES

NACODISC  DISPOSABLE FILTER CARTRIDGES are composed of a 25mm diameter .45 micron  pvc co-polymer filter element sandwiched and supported between 2 pieces of molded acrylic  plastic . unit is disposable.


Can be purchased in bags of 10 , 50 and 100

  • NACODISC-10
  • NACODISC-50
  • NACODISC-100

PART NUMBERS

  • NA-N2-1   STRAIGHT BODY STYLE GUN 
  • NA-N2-2   PISTOL STYLE BODY REAR TRIGGER STYLE GUN
  • NA-N2-3   PISTOL STYLE BODY FRONT TRIGGER STYLE GUN


  • NA-N2-1000  STRAIGHT STYLE GUN WITH POLYURETHANE COILED HOSE ASSEMBLY
  • NA-N2-2000  REAR TRIGGER PISTOL STYLE GUN WITH POLYURETHANE HOSE ASSEMBLY
  • NA-N2-3000  FRONT TRIGGER PISTOL STYLE GUN WITH POLYURETHANE HOSE ASSEMBLY

PTFE DISPENSE GUNS

teflon dispense guns

TEFLON DISPENSE GUNS

NACOM'S TEFLON DISPENSE GUNS have the same relative size of the DI SPRAY GUN with a addition of a long dispense / pour snout extending from the spray head. By inserting the snout inside the neck of the bottle, splashing of fluid is minimized. Designed for dispensing fluids such as solvents and acids.

CAN BE PURCHASED WITH OR WITHOUT HOSE ASSEMBLIES


NACOM'S PTFE DISPENSE GUNS can be purchased with or without hose assemblies.

REAR TRIGGER  DISPENSE GUNS WITH STRAIGHT  PTFE TUBING 

  • NA DG 701  1/4 In od PTFE TUBING with NADG501
  • NA DG 702  3/8 In of PTFE  TUBING  with NADG502
  • NA DG 703  1/2 In of PTFE TUBING  with NADG503

FRONT  TRIGGER DISPENSE GUNS WITH STRAIGHT PTFE TUBING

  • NA DG 801   1/4 In OD PTFE TUBING with NADG601
  • NA DG 802   3/8 In OD PTFE TUBING with NADG602
  • NA DG 803    1/2" OD PTFE TUBING with NADG603

Guns with hose assemblies are equipped with 2 ea Teflon male connector fittings


NA-DG-500 Series

  • NA DG 501   1/4" fnpt inlet Rear Trigger style PTFE DISPENSE GUN
  • NA DG 502   3/8" fnpt inlet  Rear Trigger style PTFE DISPENSE GUN
  • NA DG 503    1/2" fnpt inlet Rear Trigger style PTFE DISPENSE GUN

NA-DG-600 Series

  • NA DG 601   1/4" fnpt inlet Front Trigger style PTFE DISPENSE GUN
  • NA DG 602  3/8" fnpt inlet Front Trigger style PTFE DISPENSE GUN
  • NA DG 603   1/2"fnpt inlet Front Trigger style PTFE DISPENSE GUN 

NACOM'S PTFE DISPENSE GUNS are equipped with Viton orings as a standard . KALREZ orings may be substituted at a additional cost. When using kalrez orings  Polypropylene internals are upgraded to PVDF

TEFLON SPRAY , N2 , DISPENSE GUNS

NACOM  CATALOG SPRAY GUNS PAGES 24 thru 30 FOR DOWNLOAD

PAGE 24 TEFLON SPRAY GUNS (pdf)

Download

PAGE 25 TEFLON SPRAY GUNS (pdf)

Download

PAGE 26 TEFLON SPRAY GUNS (pdf)

Download

PAGE 27 TEFLON SPRAY GUNS (pdf)

Download

PAGE 28 TEFLON NITROGEN GUNS (pdf)

Download

PAGE 29 TEFLON SPRAY GUNS (pdf)

Download

PAGE 30 TEFLON DISPENSE GUNS (pdf)

Download

TEFLON IS A REGISTERED TRADEMARK NAME and PRODUCT

TEFLON is a Registered Trademarked name and product belonging to E.I Dupont de Nemours Co. / Chemours Co. 

ALL PRODUCT DESCRIBED AS TEFLON MAY OR MAY NOT BE ACTUAL DUPONT PTFE RESIN. 

ALL PRODUCT IS INDEED VIRGIN GRADE PTFE AND CERTIFICATION DOCUMENTS ARE ON FILE FOR REVIEW UPON WRITTEN REQUEST. ALL PTFE USED TO FABRICATE NACOM PRODUCT IS TOP GRADE VIRGIN PTFE . Teflon spray guns PTFE spray guns